Kubota WSM STV32 Workshop Manual page 197

Table of Contents

Advertisement

STV32 · STV36 · STV40, WSM
Fender Assembly
1. Remove the lever bracket (2) with the auxiliary control lever.
2. Remove the fender covers (3) (4) and the sponges (9) (10)
(11).
3. Disconnect the wiring connectors for the rear PTO switch (19),
mid PTO switch (17) and speed sensor (18).
4. Disconnect the grounding terminal (6).
5. Remove the differential lock pedal (8) with the spring.
6. Remove the grips of the rear PTO shift lever (12), position
control lever (13), cruise control lever (15) and range gear shift
lever (16).
7. Remove the screws (1) (5) (7).
8. Lift and remove the fender assembly (14) with wiring rear
harness.
(When reassembling)
A Do not confuse the grips.
-Grip (yellow) for the rear PTO shift lever (12).
-Grip (red) for the range gear shift lever (16).
A Assemble the sponge (center) (10) between the cruise control
lever (15) and range gear shift lever (16).
(1) Screw
(2) Lever Bracket
(3) Fender Cover (Right)
(4) Fender Cover (Left)
(5) Screw
(6) Grounding Terminal
(7) Screw
(8) Differential Lock Pedal
(9) Sponge (Inner)
(10) Sponge (Center)
3-S26
TRANSMISSION
(11) Sponge (Outer)
(12) Rear PTO Shift Lever
(13) Position Control Lever
(14) Fender Assembly
(15) Cruise Control Lever
(16) Range Gear Shift Lever
(17) Mid PTO Switch
(18) Speed Sensor
(19) Rear PTO Switch
0000007549E
KiSC issued 04, 2006 A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wsm stv36Wsm stv40Stv32Stv36Stv40

Table of Contents