Kubota WSM STV32 Workshop Manual page 53

STV32 · STV36 · STV40, WSM
A The following special tools are not provided, so make them referring to the figure.
Valve Guide Replacing Tool
Application : Use to press out and press fit the valve guide.
A 20 mm dia. (0.79 in. dia.)
B 11.7 to 11.9 mm dia. (0.460 to 0.468 in.dia.)
C 6.5 to 6.6 mm dia. (0.256 to 0.259 in.dia.)
D 225 mm (8.86 in.)
E 70 mm (2.76 in.)
F 45 mm (1.77 in.)
G 25 mm (0.98 in.)
H 5 mm (0.197 in.)
I 6.7 to 7.0 mm dia. (0.263 to 0.275 in.dia.)
J 20 mm dia. (0.787 in.dia.)
K 12.5 to 12.8 mm dia. (0.492 to 0.504 in.dia.)
L 8.9 to 9.1 mm (0.350 to 0.358 in.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
C0.3 Chamfer 0.3 mm (0.012 in.)
G-39
GENERAL
0000002319E
0000005170E
KiSC issued 04, 2006 A