Kubota WSM STV32 Workshop Manual page 98

STV32 · STV36 · STV40, WSM
Separating Front Axle Assembly and Outer Parts
1. Disconnect the radiator hoses (1), (5).
2. Remove the muffler (3).
3. Remove the recovery tank (6).
4. Remove the starter motor (4) and alternator (2).
5. Remove the fuel filter (9).
6. Remove the regulator valve (7) and hydraulic pump (8).
7. Remove the engine mounting screws and separate the front
axle assembly from engine.
(1) Radiator Hose
(2) Alternator
(3) Muffler
(4) Starter Motor
(5) Radiator Hose
1-S26
ENGINE
(6) Recovery Tank
(7) Regulator Valve
(8) Hydraulic Pump
(9) Fuel Filter
0000007494E
KiSC issued 04, 2006 A