Table of Contents
Advertisement
STV32 · STV36 · STV40, WSM
[3] TIRE LIQUID INJECTION
Auxiliary weights can be used to increase traction force for plowing in fields or clayey ground.
Another way is to inject water or another liquid, such as a calcium chloride solution in the tires. Water must not be
used in winter since it freezes at 0
higher effect than water since its specific gravity is higher than that of water by about 20 %. Below is an explanation
of calcium chloride solution injection.
A Do not fill the front tires with liquid.
(32
). The calcium chloride solution will not freeze and moreover, affords
Preparation of Calcium Chloride Solution
A When making a calcium chloride solution, do not pour
water over calcium chloride since this results in chemical
reaction which will cause high temperature. Instead add
a small amount of calcium chloride to the water at a time
until the desired solution is achieved.
Freezing temp.
-5
(23
)
-10
(14
)
-15
(5
)
-20
(-4
)
-25
(-13
)
-30
(-22
)
-35
(-31
)
-40
(-40
)
-45
(-49
)
-50
(-58
)
(a) Water
Attaching Injector
1. Lift the rear tires off the ground.
2. Turn the tire so that the air valve is at the top.
3. Remove the air valve, and attach the injector. (Code No.
07916-52501)
(1) Injector
G-50
Weight of CaCl to be dissolved in 100 L
(26.5 U.S.gals, 22.0 Imp.gals) of water
12 kg (26.4 lbs)
21 kg (46.3 lbs)
28 kg (61.7 lbs)
34 kg (75.0 lbs)
40 kg (88.2 lbs)
44 kg (97.0 lbs)
49 kg (108 lbs)
52 kg (114.6 lbs)
56 kg (123.5 lbs)
61 kg (134.5 lbs)
(b) CaCl (Calcium Chloride)
(2) Hose
KiSC issued 04, 2006 A
GENERAL
0000005241E
0000005243E
0000008014E
- Quick Links:
- Lubricants, Fuel and Coolant
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
