Alternator - Kubota WSM STV32 Workshop Manual

STV32 · STV36 · STV40, WSM

(2) Alternator

Pulley
1. Secure the hexagonal end of the pulley shaft with a double-
ended ratchet wrench as shown in the figure, loosen the pulley
nut with a socket wrench and remove it.
(When reassembling)
Tightening torque Pulley nut
Rear End Cover
1. Unscrew the three rear end cover screws and the B terminal
nut, and remove the rear end cover.
Brush Holder
1. Unscrew the two screws holding the brush holder, and remove
the brush holder (1).
(1) Brush Holder
IC Regulator
1. Unscrew the three screws holding the IC regulator, and
remove the IC regulator (1).
(1) IC Regulator
9-S34
ELECTRICAL SYSTEM
58.3 to 78.9
5.95 to 8.05
43.0 to 58.2 ft-lbs
0000002964E
0000002965E
0000002966E
0000002967E
KiSC issued 04, 2006 A