Kubota WSM STV32 Workshop Manual page 107

STV32 · STV36 · STV40, WSM
Fan Drive Pulley
1. Lock the flywheel not to turn using the flywheel stopper.
2. Remove the fan drive pulley mounting nut (1) using 46 mm
deep socket wrench (2).
3. Remove the fan drive pulley (3) with gear puller (4).
4. Remove the feather key.
(When reassembling)
A Apply grease to the splines of coupling.
A Tighten the fan drive pulley mounting nut to the specified
torque.
Fan drive pulley
Tightening torque
mounting nut
(1) Fan Drive Pulley Mounting Nut
(2) 46 mm Deep Socket Wrench
1-S35
ENGINE
137.3 to 156.9
14.0 to 16.0
101.3 to 115.7 ft-lbs
(3) Fan Drive Pulley
(4) Gear Puller
0000007455E
KiSC issued 04, 2006 A