Kubota WSM STV32 Workshop Manual page 245

STV32 · STV36 · STV40, WSM
2. OPERATION
(1) Brake Lever
(2) Brake Cam
(3) Cam Plate
B During Braking
When the brake pedal is pressed, the linkage causes the brake lever (1) and brake cam (2) to turn into the direction
of arrow shown in the above diagram. Therefore, the cam plate (3) also moves the direction of arrow. At this time,
since the cam plate (3) rides on the steel balls (8) set in the grooves of the transmission case (5) to press the brake
disc (6), the brake shaft (9) is braked by the frictional force generated by the cam plate (3) and brake disc (6).
(4) Rear Axle Case
(5) Transmission Case
5-M2
(6) Brake Disc
(7) Brake Plate
BRAKES
(8) Steel Ball
(9) Brake Shaft
0000007606E
KiSC issued 04, 2006 A