Kubota WSM STV32 Workshop Manual page 208

STV32 · STV36 · STV40, WSM
Accumulator (for PTO Clutch)
1. Remove the internal snap ring and pull out the accumulator
assembly (1).
(When reassembling)
A Apply transmission oil to the O-ring (4) (9) and the seal (8).
(1) Accumulator Assembly
(2) Internal Snap Ring
(3) Case
(4) O-ring
(5) Spring
(6) Spring
Neutral Valve
1. Remove the neutral valve assembly (6), (7) from the port block
(8).
2. Take out the spring holder (1), spring (2) and poppet N (3) after
tapping out the spring pin (5).
(When reassembling)
A Apply transmission oil to the O-rings.
(1) Spring Holder
(2) Spring
(3) Poppet N
(4) Valve Body
(5) Spring Pin
3-S37
TRANSMISSION
(7) Piston
(8) Seal
(9) O-ring
(10) Cover
(11) Internal Snap Ring
0000007568E
(6) Neutral Valve Assembly
(Reverse)
(7) Neutral Valve Assembly
(Forward)
(8) Port Block
0000007569E
KiSC issued 04, 2006 A