STV32 · STV36 · STV40, WSM
Governor Springs and Speed Control Plate (To be continued)
A Specific tool (1) :
1.2 mm diameter hard wire with its end hooked, overall
length 200 mm (7.87 in.).
The tip of wire is bent like the hook to hang governor
springs.
1. Remove the injection pump cover.
2. Remove the speed control plate (5) mounting nuts and bolts.
3. Using the specific tool (1), undo the large governor spring (2)
from the fork lever (3).
4. Using the specific tool (1), undo the small governor spring (4)
from the fork lever (3).
(1) Specific Tool
(2) Large Governor Spring
(3) Fork Lever
1-S32
ENGINE
(4) Small Governor Spring
(5) Speed Control Plate
0000007498E
KiSC issued 04, 2006 A