System board and components
Figure 230: Removing the TPM spacer
Ê Using a small pair of combination pliers, press together the hooks on the
TPM spacer (1, see close-up) and remove it from the system board (2).
I
If the TPM is to be replaced, the TPM spacer may remain on the
system board.
15.4.2.3 Concluding steps
"Installing the new system board" on page 309
Ê
"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 57
Ê
"Switching on the server" on page 58
Ê
296
Upgrade and Maintenance Manual
RX200 S8