Handling Slot Brackets; Installing A Slot Bracket - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual

Expansion cards and backup units
9.2

Handling slot brackets

9.2.1

Installing a slot bracket

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
I
Use the low profile bracket perforated for the ModularRAID controllers
based on LSI MegaRAID.
Figure 65: Perforated and non-perforated slot brackets
1 Full height bracket non-perforated
2 Full height bracket perforated
3 Low profile bracket perforated
Installing the slot bracket
Ê Place the controller on the mounting tabs on the slot bracket.
Ê Fasten the slot bracket to the controller with two M3 x 4.5 mm screws.
140 Upgrade and Maintenance Manual
Hardware: 5 minutes
RX200 S8