Replacing The Serial Interface; Preliminary Steps; Removing The Defective Serial Interface; Installing The New Serial Interface - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual

Serial interface
14.4

Replacing the serial interface

Upgrade and Repair Unit
(URU)
Tools: tool-less

14.4.1 Preliminary steps

"Disabling SVOM boot watchdog functionality" on page 64
Ê
"Disabling BitLocker functionality" on page 63
Ê
"Shutting down the server" on page 46
Ê
"Disconnecting the server from the mains" on page 47
Ê
"Getting access to the component" on page 47
Ê

14.4.2 Removing the defective serial interface

Ê Remove the serial interface as described in section
interface" on page

14.4.3 Installing the new serial interface

Ê Install the serial interface as described in section
interface" on page

14.4.4 Concluding steps

"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 57
Ê
"Switching on the server" on page 58
Ê
"Enabling BitLocker functionality" on page 83
Ê
278
276.
274.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Removing the serial
"Installing the serial
RX200 S8