Installing The Dummy Module - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual
Hide thumbs
Also See for PRIMERGY RX200 S8:
Table of Contents
Advertisement
Ensure that the pins on the mounting frame disengage with the screw holes
on the ODD.
Ê Remove the ODD (2).
12.3.3 Installing the dummy module
Figure 170: Installing the dummy in the mounting frame
Ê Insert the dummy in the mounting frame.
Ensure that the pins on the mounting frame engage with the screw holes on
the dummy and fix them in this position (see circles).
Figure 171: Installing the dummy module
Ê Push the dummy module inward until it engages.
RX200 S8
Upgrade and Maintenance Manual
Optical disk drive
241
Advertisement
Table of Contents
