Installing Two Additional Fan Modules; Concluding Steps - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual

11.2.5 Installing two additional fan modules

Figure 149: Removing sponges
Ê Remove the two sponges from the system fan bays "FAN 7/8" and "FAN
9/10".
Figure 150: Installed fan modules
Ê Install two fan modules in the system fan bays "FAN 7/8" and "FAN 9/10" as
described in section

11.2.6 Concluding steps

"Installing the air duct" on page 62
Ê
"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 57
Ê
RX200 S8
"Installing the new fan module" on page
Upgrade and Maintenance Manual
Processors
134.
221