System board and components
15.3.3.3 Installing the new UFM
Figure 222: Removing the UFM spacer
Ê Remove the nylon screw from the UFM (1).
Ê Remove the UFM spacer (2).
Figure 223: Installing the UFM
Ê Connect the UFM to the system board and the remaining UFM spacer (1).
Ê Fasten the UFM to the UFM spacer with the nylon screw (2).
15.3.3.4 Concluding steps
"Installing the riser module 3" on page 61
Ê
"Reassembling" on page 52
Ê
288
Upgrade and Maintenance Manual
RX200 S8