Concluding Steps; Removing A Bbu; Preliminary Steps - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual

9.5.3.6

Concluding steps

"Installing the riser module 3" on page 61
Ê
"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 57
Ê
"Updating RAID controller firmware" on page 73
Ê
"Enabling SVOM boot watchdog functionality" on page 78
Ê
"Switching on the server" on page 58
Ê
9.5.4

Removing a BBU

Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
Dispose of used battery properly. Keep away from children.
●
Do not throw battery backup units into the trash can. Batteries must
●
be disposed of in accordance with local regulations concerning
special waste.
9.5.4.1

Preliminary steps

"Shutting down the server" on page 46
Ê
"Disconnecting the server from the mains" on page 47
Ê
"Getting access to the component" on page 47
Ê
"Removing the riser module 3" on page 60
Ê
RX200 S8
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 15 minutes
183