Optical Disk Drive; Basic Information - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual

12

Optical disk drive

Safety notes
V
CAUTION!
Before installing/removing an accessible drive to/from the server, turn
●
off the server, all peripheral devices, and any other connected
devices. Also unplug all power cables from the outlet. Failure to do so
can cause electric shock.
When installing an accessible drive, hold it by the side. Applying force
●
to the top may cause failures.
Do not touch the circuitry on boards and soldered parts. Hold the
●
metallic areas or the edge of the circuit boards.
The circuit boards and soldered parts of internal options are exposed
●
and can be damaged by static electricity. Before handling them, first
touch a metal part on the server to discharge static electricity from
your body.
Before installing an internal accessible drive, see the manual for the
●
accessible drive.
When forcing an accessible drive into a server, be careful so as not
●
to pinch the cable etc. connected to an accessible drive.
For further safety information, please refer to chapter
●
information" on page
12.1

Basic information

In configurations with up to four HDD/SSD modules a 5.25-inch slimline optical
disk drive (ODD) can be installed in the right bottom side bay (see figure
page 321).
RX200 S8
31.
Upgrade and Maintenance Manual
"Important
252 on
235