8
Fans
Safety notes
V
CAUTION!
Do not damage or modify internal cables or devices. Doing so may
●
cause a device failure, fire, or electric shock.
Devices inside the server remain hot after shutdown. Wait for a while
●
after shutdown before installing or removing internal options.
The circuit boards and soldered parts of internal options are exposed
●
and can be damaged by static electricity. Before handling them, first
touch a metal part of the server to discharge static electricity from
your body.
Do not touch the circuitry on boards or soldered parts. Hold the
●
metallic areas or the edges of the circuit boards.
If devices are installed or disassembled using methods other than
●
those outlined in this chapter, the warranty will be invalidated.
The installation indicated on this note is sometimes changed to the
●
kind of possible options without notice.
For further safety information, please refer to chapter
●
information" on page
RX200 S8
31.
Upgrade and Maintenance Manual
"Important
131