15.3.3 Replacing the UFM
Field Replaceable Unit
(FRU)
Tools: – Phillips PH1 / (+) No. 1 screw driver
– combination pliers and flat nose pliers
15.3.3.1 Preliminary steps
"Locating the defective server" on page 43
Ê
"Disabling SVOM boot watchdog functionality" on page 64
Ê
"Disabling BitLocker functionality" on page 63
Ê
"Shutting down the server" on page 46
Ê
"Disconnecting the server from the mains" on page 47
Ê
"Getting access to the component" on page 47
Ê
"Removing the riser module 3" on page 60
Ê
15.3.3.2 Removing the defective UFM
Ê Remove the UFM as described in section
page
285.
Ê The UFM spacer remains on the system board.
RX200 S8
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
Software: 5 minutes
"Removing the UFM" on
287