Installing The Fan Cover - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual

4.5.2

Installing the fan cover

Figure 8: Inserting the fan cover in a slight angle
Ê Insert the fan cover in a slight angle.
Figure 9: Installing the fan cover
Ê Push the fan cover down (1).
Ê Push the edges of the fan cover down until the two green buttons engage
(2).
I
For a correct sliding the server into the rack, the height of the fan
cover and the chassis top must be on the same level. If the fan cover
is higher, push it down again until the level is equal.
RX200 S8
Upgrade and Maintenance Manual
Basic hardware procedures
53