Concluding Steps; Replacing A Bbu; Preliminary Steps; Removing The Defective Bbu - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual

Expansion cards and backup units
9.5.5.5

Concluding steps

"Installing the riser module 3" on page 61
Ê
"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 57
Ê
"Switching on the server" on page 58
Ê
9.5.6

Replacing a BBU

Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
Dispose of used battery properly. Keep away from children.
●
Do not throw battery backup units into the trash can. Batteries must
●
be disposed of in accordance with local regulations concerning
special waste.
9.5.6.1

Preliminary steps

"Disabling SVOM boot watchdog functionality" on page 64
Ê
"Shutting down the server" on page 46
Ê
"Disconnecting the server from the mains" on page 47
Ê
"Getting access to the component" on page 47
Ê
"Removing the riser module 3" on page 60
Ê
9.5.6.2

Removing the defective BBU

Ê Remove the BBU with the holder as described in section
BBU with the holder" on page
Ê Remove the BBU from the holder as described in section
BBU from the holder" on page
190
184.
186.
Upgrade and Maintenance Manual
Hardware: 15 minutes
"Removing the
"Removing the
RX200 S8