Power supply
6.2.3
Installing the power supply unit
Figure 24: Unlocking the power supply unit
Ê Push the handle of the power supply unit halfway upward in the direction of
the arrow.
Figure 25: Installing the power supply unit
Ê Carefully push the power supply unit into the empty bay (1) until it stops.
Ê Push the handle of the power supply unit as far as it will go in the direction
of the arrow (2).
I
Make sure that the power supply unit engages correctly in the bay and is
locked in position. This is the only way to prevent the power supply unit
from sliding out of its bay and being damaged during transportation.
94
Upgrade and Maintenance Manual
RX200 S8