Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual page 312

System board and components
"Enabling SVOM boot watchdog functionality" on page 78
Ê
"Switching on the server" on page 58
Ê
"Enabling BitLocker functionality" on page 83
Ê
Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
I
Configuration of network settings should be performed by the
customer. For further information, please refer to section
network settings recovery" on page 304
Ê If applicable, restore LAN teaming configurations as described in section
"After replacing the system board" on page 88
312 Upgrade and Maintenance Manual
"Note on
RX200 S8