Converting To Configuration Up To Eight Hdd/Ssd Modules; Preliminary Steps; Removing The 4Xhdd Backplane And The Odd Cage - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual

7.7 Converting to configuration up to eight
HDD/SSD modules
Upgrade and Repair Unit
(URU)
Tools: Replacing the cage: Phillips PH2 / (+) No. 2 screw driver
7.7.1

Preliminary steps

"Locating the defective server" on page 43
Ê
"Shutting down the server" on page 46
Ê
"Disconnecting the server from the mains" on page 47
Ê
"Getting access to the component" on page 47
Ê
"Removing the air duct" on page 62
Ê
7.7.2

Removing the 4xHDD backplane and the ODD cage

Ê Remove the 4xHDD backplane as described in section
defective 4xHDD backplane" on page
Ê If applicable, remove the ODD from its bay.
RX200 S8
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
Hardware: 15 minutes
117.
"Removing the
125