Installing The New Fbu; Concluding Steps - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual

9.5.7.3

Installing the new FBU

Ê Install the FBU in the holder as described in section
the holder" on page
Ê Connect the FBU cable to the FBU as described in section
FBU cable to the FBU" on page
Ê Install the FBU with the holder as described in section
with the holder" on page
9.5.7.4

Concluding steps

"Installing the riser module 3" on page 61
Ê
"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 57
Ê
"Updating RAID controller firmware" on page 73
Ê
"Enabling SVOM boot watchdog functionality" on page 78
Ê
"Switching on the server" on page 58
Ê
RX200 S8
179.
180.
180.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing the FBU in
"Installing the FBU
"Connecting the
193