Expansion Cards And Riser Cards; Installing An Expansion Card - Slot 1-3; Preliminary Steps - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual

Expansion cards and backup units
9.4

Expansion cards and riser cards

9.4.1

Installing an expansion card - slot 1-3

Upgrade and Repair Unit
(URU)
Tools: tool-less
9.4.1.1

Preliminary steps

"Disabling BitLocker functionality" on page 63
Ê
"Disabling SVOM boot watchdog functionality" on page 64
Ê
"Shutting down the server" on page 46
Ê
"Disconnecting the server from the mains" on page 47
Ê
"Getting access to the component" on page 47
Ê
Ê Remove the corresponding riser module as described in section
the riser module 1" on page 58
page 59.
152
or "Removing the riser module 2" on
Upgrade and Maintenance Manual
Hardware: 10 minutes
Software: 5 minutes
"Removing
RX200 S8