Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual page 328

Appendix
The LEDs have the following meaning:
LED
A - Identification blue on
B - CSS
(Customer Self
Service)
C - GEL
(Global Error
LED)
F - Controller
G - CPU
H - Memory
module
I - iRMC
K - Fans
L - Battery
328
Indicator Meaning
server is identified via the ServerView
Operations Manager
blue flashing local monitor off
off no error (CSS component)
yellow on indicates a prefailure (CSS component)
yellow flashing indicates a failure (CSS component)
off no error (non CSS component)
orange on indicates a prefailure (non CSS
component)
orange flashing indicates a failure of a non CSS
component.
Reasons for a failure may be:
– over temperature measured by one of
– sensor is defective
– CPU error
– software detected an error
off PCI card okay
orange on PCI card failure (PCI card installed on riser
card)
off CPU okay
orange on CPU failure
off memory module running
orange on memory module failure
off iRMC S4 inactive
green flashing iRMC S4 okay
off fan running
orange on fan failure
off battery running
orange on battery failure
Upgrade and Maintenance Manual
the sensors
RX200 S8