Concluding Steps - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual

Expansion cards and backup units
Ê Carefully press the expansion card into the riser card slot (A), until it clicks
into place.
Ê Position the expansion card on the distance holder (see circle).
Figure 92: Connecting cables
Ê If necessary, connect the cables to the expansion card.
9.4.2.3

Concluding steps

"Installing the riser module 3" on page 61
Ê
"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 57
Ê
"Switching on the server" on page 58
Ê
"Updating RAID controller firmware" on page 73
Ê
Ê If applicable, "Enabling Option ROM scan" on page 74
"Enabling SVOM boot watchdog functionality" on page 78
Ê
"Enabling BitLocker functionality" on page 83
Ê
158 Upgrade and Maintenance Manual
RX200 S8