3Com SuperStack 4 Configuration Manual page 337

Creating/Updating View
Information or Deleting
a View
Setting the Size of SNMP
Packet Sent/Received by
an Agent
Enabling/Disabling a
Port Transmitting Trap
Information SNMP
Agent
Disabling SNMP Agent
Table 424 Add/Delete a user to/from an SNMP Group
Operation Command
Add a user to an SNMP
snmp-agent usm-user { v1 | v2c }
group.
groupname
username groupname
sha }
privpassstring
Delete a user from an
undo snmp-agent usm-user { v1 | v2c }
SNMP group.
groupname
groupname
You can use the following commands to create, update the information of views
or delete a view.
Perform the following configuration in System View.
Table 425 Create/Update View Information or Deleting a View
Operation
Create/Update view information
Delete a view
You can use the following commands to set the size of SNMP packet sent/received
by an agent.
Perform the following configuration in System View.
Table 426 Set the Size of SNMP Packet sent/received by an Agent
Operation
Set the size of SNMP packet sent/received
by an agent
Restore the default size of SNMP packet
sent/received by an agent
The agent can receive/send the SNMP packets of the sizes ranging from 484 to
17940, measured in bytes. By default, the size of SNMP packet is 1500 bytes.
To enable/disable a port transmitting trap information SNMP Agent. Perform the
following configuration in Ethernet Port View.
Table 427 Enable/Disable a Port Transmitting Trap Information SNMP Agent
Operation
enable current port to transmit the trap information enable snmp trap updown
disable current port to transmit the trap information undo enable snmp trap updown
To disable SNMP Agent, perform the following configuration in System View.
Table 428 Disable SNMP Agent
Operation
Disable snmp agent
acl-list
[ acl ] snmp-agent usm-user v3
[ authentication-mode { md5 |
authpassstring
[ privacy-mode { des56
} ] ] [ acl
undo snmp-agent usm-user v3
{ local | engineid
Command
snmp-agent mib-view { included |
excluded } view-name oid-tree
undo snmp-agent mib-view
Command
snmp-agent packet max-size
byte-count
undo snmp-agent packet max-size
Command
Command
undo snmp-agent
SNMP Configuration
username
acl-list
]
username
username
engine-id
}
view-name
349