3Com SuperStack 4 Configuration Manual page 289

Configuring the Running
Parameters of FTP Server
Displaying and
Debugging FTP Server
Introduction to FTP
Client
Operation
Configure password for local user (Local User
View)
Configure service type for local user (Local User
View)
Cancel password for local user (Local User View) undo password
Cancel service type for local user (Local User
View)
Only the clients who have passed the authentication and authorization
successfully can access the FTP server.
You can use the following commands to configure the connection timeout of the
FTP server. If the FTP server receives no service request from the FTP client for a
period of time, it will cut the connection to it, thereby avoiding the illegal access
from the unauthorized users. The period of time is FTP connection timeout.
Perform the following configuration in System View.
Table 347 Configure FTP Server Connection Timeout
Operation
Configure FTP server connection timeouts
Restoring the default FTP server connection timeouts
By default, the FTP server connection timeout is 30 minutes.
After the above configuration, execute
the running of the FTP Server configuration, and to verify the effect of the
configuration.
Table 348 Display and Debug FTP Server
Operation
Display FTP server
Display the connected FTP users.
The
display ftp-server
information about the current FTP server, including the maximum amount of users
supported by the FTP server and the FTP connection timeout. The
command can be used for displaying the detailed information about the
ftp-user
connected FTP users.
As an additional function provided by the Switch, FTP client is an application
module and has no configuration functions. The Switch connects the FTP clients
and the remote server and inputs the command from the clients for corresponding
operations (such as creating or deleting a directory).
FTP Client Configuration Example
Networking Requirement
The Switch serves as the FTP client and the remote PC as the FTP server. The
configuration on the FTP server: Configure a FTP user named as Switch, with the
Command
password [ cipher | simple ]
password
service-type ftp ftp-directory
directory
undo service-type ftp [
ftp-directory ]
command in all views to display
display
Command
display ftp-server
display ftp-user
command can be used for displaying the configuration
FTP Overview
Command
minute
ftp timeout
undo ftp timeout
display
301