3Com SuperStack 4 Configuration Manual page 205

Only one monitor port can be configured on one Switch. If a group of Switches
form a Fabric, only one monitor port can be configured on one Fabric.
2 Configure traffic mirroring
Perform the following configuration in the Ethernet Port View.
Table 237 Configuring Traffic Mirroring
Operation
Configure traffic mirroring
Delete Traffic Mirroring
1 Delete traffic mirroring
Perform the following configuration in the Ethernet Port View.
Table 238 Delete Traffic Mirroring
Operation
Cancel the
configuration of traffic
mirroring
2 Delete monitor port.
Perform the following configuration in the Ethernet Port View.
Table 239 Delete Monitor Port
Operation
Delete monitor port
For details about the command, refer to the Command Manual.
Setting Queue Scheduling
Queue scheduling is commonly used to resolve the problem that multiple
messages compete for resource when the network congestion happens. The
queue scheduling function puts the packet to the output queue of the port
according to the 802.1p priority of the packet. The mapping relationship between
802.1p priority and output queue of the port is as shown in
Table 240 Mapping between 802.1p Priority Levels and Outbound Queues
802.1p priority level
0
1
2
3
4
5
6
7
Perform the following configuration in the Ethernet Port View.
Command
mirrored-to inbound ip-group
rule
rule [ link-group
acl_number
] | link-group
cpu | monitor-interface }
Command
undo mirrored-to inbound {ip-group {
acl_name } [ rule rule
acl_name rule
} [ rule
Command
undo monitor
Queues
2
0
1
3
4
5
6
7
QoS Configuration
acl_number
acl_number
rule
rule
[ rule
acl_number
] | link-group { acl_number
] }
Table 240.
217
[
rule
]
] } {
|
|