3Com SuperStack 4 Configuration Manual page 410

422 C C: A
HAPTER UTHENTICATING THE
Adding a 3Com
Switch 5500G-EI as a
RADIUS client
S 5500G-EI
WITCH WITH
Once logged into the Cisco Secure ACS interface, follow these steps:
1 Select Network Configuration from the left hand side
2 Select Add Entry from under AAA Clients.
3 Enter the details of the 3Com switch.
Spaces are not permitted in the AAA Client Host name.
An example is shown below
4 Select Submit. Do not restart the ACS server at this stage
C S ACS
ISCO ECURE