3Com SuperStack 4 Configuration Manual page 284

296 C 12: F S
HAPTER ILE YSTEM
Directory Operation
File Operation
M
ANAGEMENT
You can use the file system to create or delete a directory, display the current
working directory, and display the information about the files or directories under
a specified directory. You can use the following commands to perform directory
operations.
Perform the following configuration in User View.
Table 333 Directory Operation
Operation
Create a directory
Delete a directory
Display the current working directory
Display the information about directories or files
Change the current directory
The file system can be used to delete or undelete a file and permanently delete a
file. Also, it can be used to display file contents, rename, copy and move a file and
display the information about a specified file.
Using the
delete file-url
file on the flash file system and does not free flash space. The file can be recovered
using the
undelete
system use the
delete /unreserved file-url
will ensure that space is made available on the flash file system for additional
information. To ensure that all deleted files have been removed from the system
use the
reset recycle-bin
the file system.
When operating in a stack of switches to clear space the user has to change to the
flash of each switch in the stack separatly and then clear space in the file system of
each switch in turn. Use the
different switches file system or the
the command "reset recycle".
You can use the following commands to perform file operations.
Perform the following configuration in User View.
Table 334 File Operation
Operation
Delete a file
Undelete a file
Delete a file from the recycle bin permanently
View contents of a file
Rename a file
Copy a file
Move a file
Display the information about directories or files dir [ / all ] [
command to delete a file, leaves the contents of the
command. To delete a file and free space on the flash file
command, this will prompt for removal of all files in
cd directory
unit2>flash: device name
Command
directory
mkdir
directory
rmdir
pwd
dir [ / all ] [ file-url
directory
cd
command. Using this command
command for changing focus to a
Command
delete [ /unreserved ]
undelete file-url
reset recycle-bin [
/ force ]
file-url
more
fileurl-source
rename
fileurl-dest
copy fileurl-source fileurl-dest
fileurl-source fileurl-dest
move
file-url
]
parameter for
file-url
file-url
] [
✽