Qos Configuration - 3Com SuperStack 4 Configuration Manual

220 C 8: ACL C
HAPTER ONFIGURATION
Displaying and
Debugging QoS
Configuration

QoS Configuration

Example
Operation Command
Cancel the
undo traffic-statistic inbound
configuration of traffic
acl_number
statistics
rule
rule
Display the statistics
display qos-interface {
information
interface_type interface_num
traffic-statistic
For details about the command, refer to the Command Reference Manual.
You can use the
display
check the status of the configuration. You can also clear the statistic information
using the command in the Ethernet Interface View.
reset
Table 247 Displaying and Debugging QoS Configuration
Operation Command
Display mirroring
display mirror
configuration
Display queue
display queue-scheduler
scheduling mode
Display line rate for
display qos-interface {
outbound packets
interface_type interface_num
Display port QoS
display qos-interface {
configuration
interface_type interface_num
Display traffic limit
display qos-interface {
interface_type interface_num
traffic-limit
Display priority label
display qos-interface {
interface_type interface_num
traffic-priority
Display the settings
display qos-interface {
of the traffic mirror
interface_type interface_num
mirrored-to
Display the setting of
display qos-interface {
the redirection
interface_type interface_num
parameters
traffic-redirect
Display the traffic
display qos-interface {
statistics information
interface_type interface_num
traffic-statistic
Traffic Limit and Line Rate Configuration Example
Networking Requirement
The intranet is connected through 1000 Mbps ports between departments and
the wage server is connected through the port Ethernet1/0/1 (subnet address
129.110.1.2). For the wage server, the inbound traffic is limited at 128 kbps and
the inbound port rate at 128 kbps. Those packets exceeding the threshold will be
labeled with dscp priority level 4.
[ rule rule
rule ] ] | link-group
] }
command in any view to see the QoS operation and to
ip-group
[ link-group acl_number
acl_number [ rule
interface_name
|
unit_id
| }
interface_name
|
unit_id
| } line-rate
interface_name
|
unit_id
| } all
interface_name |
| unit_id }
interface_name
|
unit_id
| }
interface_name |
| unit_id }
interface_name
|
unit_id
| }
interface_name |
| unit_id }