3Com SuperStack 4 Configuration Manual page 23

Features and Functions
of Command Line
Command Line Help
The command line interface provides full and partial online help.
You can get help information through the online help commands, which are
described below:
1 Enter in any view to get all the commands in that view.
?
2 Enter a command with a
all the parameters and the corresponding brief descriptions will be listed.
[5500]interface ?
Aux
Ethernet
GigabitEthernet
Loopback
NULL
Vlan-interface
3 Enter a character string followed by a
string as their initials will be listed.
<SW5500>p?
ping
4 Enter a command with a character string and
character string as their initials in the command will be listed.
<SW5500>display ver?
version
5 Enter the first letters of a keyword of a command and press <Tab>. If no other
keywords begin with these letters, then this unique keyword will be displayed
automatically.
6 To switch to the Chinese display for the above information, perform the
command.
language-mode
Displaying Characteristics of the Command Line
The command line interface provides a pausing function. If the information to be
displayed exceeds one screen, users have three choices, as shown in
Table 6 Functions of Displaying
Key or Command
Press <Ctrl+C> when the display pauses
Enter a space when the display pauses
Press <Enter> when the display pauses
History Command
The command line interface provides a function similar to that of the DosKey.
Commands entered by users are automatically saved by the command line
interface and you can invoke and execute them at any time later. The history
separated by a space. If this position is for parameters,
?
Aux interface
Ethernet interface
GigabitEthernet interface
LoopBack interface
NULL interface
VLAN interface
, then all the commands with this character
?
, then all the keywords with this
?
Function
Stop displaying and executing command.
Continue to display the next screen of
information.
Continue to display the next line of
information.
Command Line Interface
Table 6.
35