3Com SuperStack 4 Configuration Manual page 300

312 C 12: F S
HAPTER ILE YSTEM
M
ANAGEMENT
Perform the following configuration in User View.
Table 356 Reboot the Switch
Operation
Reboot the Switch
Enabling the Timing Reboot Function
After enabling the timing reboot function on the Switch, the Switch will be
rebooted at the specified time.
Perform the following configuration in User View, and the
command can be performed in any view.
reboot
Table 357 Reboot the Switch
Operation
Enable the timing reboot function of the
Switch, and set specified time and date
Enable the timing reboot function of the
Switch, and set waiting time
Cancel the parameter configuration of timing
reboot function of the Switch
Check the parameter configuration of the
reboot terminal service of the current Switch
Designating the APP Adopted when Booting the Switch Next Time
In the case that there are several APPs in the Flash Memory, you can use this
command to designate the APP adopted when booting the Switch next time.
Perform the following configuration in User View.
Table 358 Designate the APP Adopted when Booting the Switch Next Time
Operation
Designate the APP adopted when booting
the Switch next time
Upgrading BootROM
You can use this command to upgrade the BootROM with the BootROM program
in the Flash Memory. This configuration task facilitates the remote upgrade. You
can upload the BootROM program file from a remote end to the Switch via FTP
and then use this command to upgrade the BootROM.
Perform the following configuration in User View.
Table 359 Upgrade BootROM
Operation
Upgrade BootROM
Displaying and Debugging Device Management
After the above configuration, execute
the running of the device management configuration, and to verify the effect of
the configuration.
Command
unit-id
reboot [ unit
Command
schedule reboot at
yyyy/mm/dd
]
schedule reboot delay {
mmm
}
undo schedule reboot
display schedule reboot
Command
boot boot-loader
Command
file-url
boot bootrom
command in all views to display
display
]
display schedule
hh:mm [
hhh:mm
|
file-url