3Com SuperStack 4 Configuration Manual page 412

424 C C: A
HAPTER UTHENTICATING THE
Adding a User for
Network Login
S 5500G-EI
WITCH WITH
8 Select Submit.
9 Repeat steps 1 to 8 for each Switch 5500G-EI on your network. When all of the
Switch 5500G-EIs have been added as clients to the Cisco Secure ACS server,
restart the Secure ACS server by selecting System Configuration from the left hand
side, then select Service Control and click Restart.
Existing users on a network with a Secure ACS server can be authorised using the
TACACS+ or RADIUS server. New users connected through a Switch 5500G-EI to
the network need to be authorised via the RADIUS server. An optional VLAN and
QoS profile can be applied to the user.
Follow these steps to add a user for Network Login.
1 Select User Setup from the left hand side
2 Enter the username, and select Add/edit
3 Enter the user information, scroll down to complete the user profile, including
specific RADIUS attributes if required.
C S ACS
ISCO ECURE