3Com SuperStack 4 Configuration Manual page 213

Applying QoS Profile to
the Port
User-based mode: If the source station information (source MAC address,
■
source IP address or source MAC address + IP address) has been defined in the
ACL which is referenced in the traffic actions, the Switch cannot deliver the
QoS profile; if no source station information is available, the Switch generates a
new ACL by adding the source MAC address and source IP address into the
existing ACL, and then delivers all traffic actions in the QoS profile to the user
port.
Port-based mode: The Switch delivers the traffic actions in the QoS profile
■
directly to the user port.
Perform the following configuration in Ethernet Port View.
Table 251 Configuring Profile Application Mode
Operation
Configure the user-based mode on the port qos-profile user-based
Restore the default (port-based) mode on
the port
By default, port-based mode is enabled on the port.
With this configuration, you can apply all traffic actions in the QoS profile to the
current port.
In System View
In System View, you can apply the QoS profile to one or more consecutive ports.
Table 252 Applying QoS Profile to the Port in System View
Operation Command
Apply the QoS profile
apply qos-profile
to the port
interface_name
to interface {
interface_num
Remove the
undo apply qos-profile
configuration
interface_name
to interface {
interface_num
In Ethernet Port View
In Ethernet Port View, you can only apply the QoS profile to the current port.
Table 253 Applying QoS Profile to the Port in Ethernet Port View
Operation
Apply the QoS profile to the port
Remove the configuration
You cannot delete the specific QoS profile once you apply it to the port.
Displaying and Debugging QoS Profile Configuration
Use the command in any view to check the configuration result of the
display
QoS profile.
QoS Profile Configuration
Command
undo qos-profile user- based
profile_name
interface_type interface_num
|
interface_name
} ]
profile_name
interface_type interface_num
|
interface_name
} ]
Command
apply qos-profile profile_name
undo apply qos-profile
225
interface {
} [
interface_type
|
interface {
} [
interface_type
|
profile_name