3Com SuperStack 4 Configuration Manual page 344

356 C 12: F S
HAPTER ILE YSTEM
RMON Configuration
Example
M
ANAGEMENT
Operation
Display the alarm information of
RMON
Display the extended alarm
information of RMON
Display the RMON event
Display the event log of RMON
Networking Requirements
Set an entry in RMON Ethernet statistics table for the Ethernet port performance,
which is convenient for network administrators' query.
Networking Diagram
Figure 92 RMON Configuration Networking
Configuration Procedure
1 Configure RMON.
[SW5500-GigabitEthernet1/0/1]rmon statistics 1 owner 3com-rmon
2 View the configurations in User View.
<SW5500> display rmon statistics Ethernet 1/0/1
Statistics entry 1 owned by 3com-rmon is VALID.
Gathers statistics of interface GigabitEthernet1/0/1. Received:
octets
broadcast packets
undersized packets
fragments packets
CRC alignment errors:0
Dropped packet events (due to lack of resources):0
Packets received according to length (in octets):
64 :644
256-511:101
Command
display rmon alarm [
display rmon prialarm [
prialarm-table-entry
display rmon event [
display rmon eventlog [
Internet
Network Port
Console Port
Switch
: 270149,packets
:1570 ,multicast packets:365
:0 ,oversized packets:0
:0 ,jabbers packets
,collisions
, 65-127 :518
, 512-1023:3
alarm-table-entry
]
event-table-entry
event-number
: 1954
:0
:0
, 128-255 :688
, 1024-1518:0
]
]
]