3Com SuperStack 4 Configuration Manual page 180

192 C 7: M
HAPTER ULTICAST
PIM-DM Configuration
Example
P
ROTOCOL
Execute the
debugging
Table 210 Displaying and debugging PIM-DM
Operation
Display the PIM multicast
routing table
Display the PIM interface
information
Display the information
about PIM neighboring
routers
Enable the PIM
debugging
Disable the PIM
debugging
Enable the PIM-DM
debugging
Disable the PIM-DM
debugging
Networking Requirements
Switch_A has a port carrying Vlan 10 to connect the Multicast Source, a port
carrying Vlan11 to connect Switch_B and a port carrying Vlan12 to connect to
Switch_C. Configure to implement multicast between Multicast Source and
Receiver 1 and Receiver 2.
command in user view for the debugging of PIM-DM.
Command
display pim routing-table [ { { *g [
group_address [ mask {
| **rp [ rp_address
group_address
} ] ] } | {
mask source_address
} ] |
mask
} ] } * } | incoming-interface {
interface-type interface_number
| null } | { dense-mode | sparse-mode } ] *
display pim interface [
interface_number ]
display pim neighbor [
interface_number
]
debugging pim common { all | event | packet |
timer }
undo debugging pim common { all | event | packet
| timer }
debugging pim dm { alert | all | mbr | mrt |
timer | warning | { recv | send } { all | assert
| graft | graft-ack | join | prune } }
undo debugging pim dm { alert | all | mbr | mrt
| timer | warning | { recv | send } { all |
assert | graft | graft-ack | join | prune } }
mask_length | mask
[ mask { mask_length
mask_length
[ mask {
mask_length
[ mask {
| interface name
interface-type
interface-type
} ] ]
| mask
|
|