3Com SuperStack 4 Configuration Manual page 303

Displaying the State
and Information of
the System
Setting the System Clock
Perform the operation of
Table 362 Set the System Clock
Operation Command
Set the system clock
clock datetime
Setting the Time Zone
You can configure the name of the local time zone and the time difference
between the local time and the standard Universal Time Coordinated (UTC).
Perform the following operations in the User View.
Table 363 Setting the Time Zone
Operation
Set the local time
Restore to the default UTC time zone
By default, the UTC time zone is adopted.
Setting the Summer Time
You can set the name, start and end time of the summer time.
Perform the following operations in the User View.
Table 364 Setting the Summer Time
Operation
Set the name and range of the summer
time which is effective for one year
Set the name and range of the summer
time whic is effective for every year
Remove the setting of the summer time undo clock summer-time
By default, the summer time is not set.
The commands can be classified as follows according to their functions.
display
Commands for displaying the system configuration information
■
Commands for displaying the system running state
■
Commands for displaying the system statistics information
■
For the commands related to each protocol and different ports, refer to
display
the relevant chapters. The following
the system state and the statistics information.
Displaying the State and Information of the System
command in the User View.
clock datetime
time date
Command
clock timezone
} HH:MM:SS
undo clock timezone
Command
clock summer-time
start-time start-date end-time
end-date offset-time
clock summer-time zone name repeating
{ start-time start-date end-time
end-date | start-time start-year
start-month start-week start-day
end-time end-year end-month end-week
end-day } offset-time
commands are used for displaying
display
zone_name
{ add | minus
zone_name one-off
315