3Com SuperStack 4 Configuration Manual page 402

414 C B: RADIUS S
HAPTER
RADIUS C S
ERVER AND LIENT
Configuring auto VLAN and QoS for Funk RADIUS
To set up auto VLAN and QoS using Funk RADIUS, follow these steps:
1 Edit the dictionary file
RADIUS server are returned to the Switch 5500G-EI. The changes to make are:
a Add an R at the end of the correct attributes in the file, see example below.
The attributes will now appear as potential Return list attributes for every user.
2 After saving the edited
3 To use these return list attributes, they need to be assigned to a user or group.
Create a new user and add the return list attributes shown in
Table 462
Table 461 Summary of auto VLAN attributes
For Auto VLAN
Tunnel-Medium-type
Tunnel-Private-Group-ID
Tunnel-Type
Table 462 Summary of QoS attributes
For Auto QoS
Filter-id
ETUP
so that Return list attributes from the Funk
radius.dct
file, stop and restart the Funk RADIUS service.
radius.dct
Return String
802
2
VLAN
Return String
profile=student
Table 461.and
Comment
VLAN value
Comment
QoS Profile name