Dell PowerConnect W-AirWave 7.6 User Manual page 184

Figure 118:
RAPIDS > Setup Page Illustration
Table 92:
RAPIDS > Setup > Basic Configuration Fields and Default Values
Field
ARP IP Match Timeout (1-
168 hours)
RAPIDS Export Threshold
Wired-to-Wireless MAC
Address Correlation (0-8
bits)
Wireless BSSID Correlation
(0-8 bits)
Delete Rogues not detected
for (0-30 days, zero
disables):
Automatically OS scan
rogue devices
Wired-to-Wireless Time
Correlation Window
(minutes, zero disables):
172 | Using RAPIDS and Rogue Classification
Default Description
If you have routers and switches on the AirWave, and it's scanning them for
ARP tables, this can assign a rogue IP address information. This timeout
24 specifies how recent that information needs to be for the IP address to be
considered valid. Note that the default ARP poll period is long (several
hours).
Suspected
Exported rogues will be sent to VisualRF for location calculation.
Rogue
Discovered BSSIDs and LAN MAC addresses which are within this bitmask
will be combined into one device. 4 requires all but the last digit match
4
(aa:bb:cc:dd:ee:fX). 8 requires all but the last two digits match
(aa:bb:cc:dd:ee:XX).
Similar BSSIDs will be combined into one device when they fall within this
bitmask. Setting this value too high may result in identifying two different
physical devices as the same rogue.
4
NOTE: When you change this value, RAPIDS will not immediately combine
(or un-combine) rogue records. Changes will occur during subsequent
processing of discovery events.
This value cannot be larger than the rogue discovery event expiration (30)
N/A
configured on the AMP Setup page, unless that value is set to 0.
Whether to scan the operating system of rogues. Enabling this feature will
cause RAPIDS to perform an OS scan when it gets in IP address for a rogue
No
device. The OS scan will be run when a rogue gets an IP address for the
first time or if the IP address changes.
Specify a time frame for wired and wireless correlation. RAPIDS discovery
360 events detected wirelessly and on LAN will only match if the wireless and
LAN discovery events occur during this timeframe.
Dell PowerConnect W-AirWave 7.6 | User Guide