Dell PowerConnect W-AirWave 7.6 User Manual page 42

Figure 19:
AMP Setup > Roles > Add/Edit Role Page Illustration
3. Enter or edit the settings on this page. As explained earlier in this section, Roles define the type of user-level
access, the user-level privileges, and the view available to the user for device groups and devices in AirWave. The
available configuration options differ for each role type.
NOTE: Most users will see two sections on this page: Role and Guest User Preferences. The Guest User Preferences section will not
appear, however, if Guest User Configuration is disabled in AMP Setup > General.
The following tables describe the available settings and default values for each role type.
Table 18:
AMP Setup > Roles > Add/Edit Roles Fields and Default Values for AMP Administrator Role
Setting
Name
Enabled
Type
30 | Configuring AirWave
Default Description
Sets the administrator-definable string that names the role. The role name should
None indicate the devices and groups that are viewable, as well as the privileges granted to
that role.
Disables or enables the role. Disabling a role prevents all users of that role from
Yes
logging in to AirWave.
Defines the type of role.
AMP Administrator—The AirWave Administrator has full access to AirWave and all of
AP/Device
the devices. Only the AirWave Administrator can create new users or access the AMP
Manager
Setup page, the VisualRF > Setup page, VisualRF > Audit Log page, System > AMP
Events, and System > Performance.
Dell PowerConnect W-AirWave 7.6 | User Guide