Dell PowerConnect W-AirWave 7.6 User Manual page 179

Figure 114:
Group > Templates > Add Page Illustration
4. Use the drop-down menu to select a device from which to build the global template and select Fetch. The menus
are populated with all devices that are contained in any group that subscribes to the global group. The fetched
configuration populates the template field. Global template variables can be configured with the Add button in
the Template Variables box, illustrated in
Figure 115:
Template Variables Illustration
The variable name cannot have any spaces or non-alphanumeric characters. The initial variable value entered is
the default value, but can be changed on a per-group basis later. You can also populate global template variables
by uploading a CSV file (see below).
5. Once you have configured your global template, select Add. You are taken to a confirmation configuration page
where you can review your changes.
6. If you want to add the global template, select Apply Changes Now. If you do not want to add the template,
select Cancel and Discard Changes. Canceling from the confirmation configuration page causes the template
and all of the template variables to be lost.
7. Once you have added a new global template, you can use a CSV upload option to configure global template
variables. Go to the Groups > Templates configuration page and select the CSV upload icon for the template.
The CSV file must contain columns for Group Name and Variable Name. All fields must be completed.
Group Name—the name of the subscriber group that you wish to update.
n
Dell PowerConnect W-AirWave 7.6 | User Guide
Figure 115.
Creating and Using Templates | 167