Deploying Aps For Client Location Accuracy - Dell PowerConnect W-AirWave 7.6 User Manual

Figure 218:
WLC RRM Configuration in AirWave
Review the values in the Monitor Intervals section. These should be configured to a recommended setting of
l
180 for better accuracy.

Deploying APs for Client Location Accuracy

Deploying access points for client location accuracy can be different than deploying access points for capacity.
Follow these guidelines for best results:
Ensure that at least 3 radios can hear each client devices at -85 dBm or below
l
Ensure that you deploy an access point approximately every 3,500 square feet.
l
For square or rectangular floor plans ensure access points are deployed on the exterior walls of each floor with
l
access points in the middle as well.
Refer to Figure 219
Figure 219:
Rectangular Floor Plan AP Deployment
Dell PowerConnect W-AirWave 7.6 | User Guide
for an example.
Using VisualRF | 289