Configuring Proxim Mesh Radio Settings - Dell PowerConnect W-AirWave 7.6 User Manual

Figure 57:
Groups > PTMP Page Illustration
3. Define the settings on this page.
Table 64:
Groups > PTMP Fields and Default Values
Setting
802.11a Radio Channel
802.11g Radio Channel
Channel Bandwidth
Network Name
Network Secret
4. Select Save and Apply when configurations are complete to make them permanent, or select Save to retain these
settings prior to pushing to controllers at a later time.

Configuring Proxim Mesh Radio Settings

1. Go to the Groups > Proxim Mesh configuration page to configure Mesh-specific radio settings.
2. Define the settings as required for your network.
the settings and default values.
Figure 58:
Groups > Proxim Mesh Page Illustration
Dell PowerConnect W-AirWave 7.6 | User Guide
Table 64 describes the settings and default values.
Default Description
Selects the channel used for 802.11a radios by the devices in this
58
group.
Selects the channel used for 802.11g radios by the devices in this
10
group.
20 Defines the channel bandwidth used by the devices in this group.
Sets the Network name, with a range of length supported from two to
Wireless Network
32 alphanumeric characters.
None Sets a shared password to authenticate clients to the network.
Figure 58 illustrates this page. The tables that follow describe
Configuring and Using Device Groups | 89