Figure 104:
Edit Multiple Interfaces
You will remain on the same page, but will have the option to make changes to the most commonly edited settings
in batch mode, as shown in
Figure 105:
Multiple Interface Editing Page Illustration
AirWave assembles the entire running configuration using templates and your modifications to these pages. For a
more detailed discussion on templates, see
Individual Device Support and Firmware Upgrades
Perform the following steps to configure AP communication settings for individual Dell PowerConnect W-Series
device types.
1. Locate the Device Communication area on the APs/Devices > Manage page.
2. Specify the credentials to be used to manage the AP.
142 | Discovering, Adding, and Managing Devices
Figure
105.
"Creating and Using Templates" on page
Figure 106
illustrates this page.
Dell PowerConnect W-AirWave 7.6 | User Guide
151.