Viewing Device Events In System > Syslog & Traps - Dell PowerConnect W-AirWave 7.6 User Manual

Table 102:
A Sample of Important Status Logs
Log
pgsql
error_log
maillog
radius
async_logger
async_logger_client
config_pusher
visualrf.log
Viewing Device Events in System > Syslog & Traps
Admins can use the System > Syslog & Traps page to review all syslog messages and SNMP traps that AirWave
receives from the trigger type Device Event. These device events are listed by time, type, source device, AP, severity,
facility, category, and message. Most columns can be filtered using the funnel icon (
filtered by substring using the Search field, as seen in
You can change the historical data retention from the Device Events (Syslog, Traps) field in AMP Setup >
General.
Figure 127:
System > Syslog & Traps Page Illustration
Table 103 describes the columns and the information provided in each:
Table 103:
System > Syslog & Traps Columns and Descriptions
Column
Time
Type
Dell PowerConnect W-AirWave 7.6 | User Guide
Description
Logs database activity.
Reports problems with the web server. Also linked from the internal server error page that displays
on the web page; please send this log to Dell support whenever reporting an internal server error.
Applies in cases where emailed reports or alerts do not arrive at the intended recipient's address.
Displays error messages associated with RADIUS accounting.
Tracks many device monitoring processes, including user-AP association.
Logs device configuration checks.
Logs errors in pushing configuration to devices.
Details errors and messages associated with the VisualRF application.
Description
The timestamp of the device event.
Either Syslog or SNMP Trap.
Figure 127.
Performing Daily Administration in AirWave | 189
), and messages can be