Dell PowerConnect W-AirWave 7.6 User Manual page 236

Field
Severe Alert Threshold
Include Device Types
Search Preferences
Search Method
Display Preferences
Default Number of Records per
List
Reset List Preferences
Customize Columns for Other
Roles
Console Refresh Rate
Idle Timeout
(5 mins to 240 mins)
To configure your own user account with the Home > User Info page, enter the following information in the User
Information section:
Name—Enter the ID by which you log into and operate in AirWave.
l
224 | Performing Daily Administration in AirWave
Description
Configures the minimum severity of an alert to be included in the Severe Alerts count.
See "Setting Severe Alert Warning Behavior" on page 15
Note: The severe alerts count header info will only be displayed if 'Severe Alerts' is
selected in the Stats section above and if a severe alert exists.
Note: This field only appears if you selected Yes in the Customize Header Columns
field.
Configures the types of devices that should be included in the header stats. If a device
type is not selected then it will not be included in the header stats.
Note: This field only appears if you selected Yes in Customize Header Columns.
Specify one of the following search methods:
Use System Defaults: The Search Method will be based on the system-wide
l
configuration setting. This method is configured on the AMP Setup > General
page.Active clients + all devices: This looks at all active clients (not historical) and
all devices. This search is not case-sensitive.
Active clients + all devices: This looks at all active clients (not historical) and all
l
devices. This search is not case-sensitive.
Active clients + all categories: This looks at all active clients (not historical) and all
l
categories. This search is not case-sensitive.
Active clients + all categories (exact match): This looks at all active clients (not
l
historical) and all categories. This search returns only matches that are exactly as
typed (IP, username, device name, etc). This search is case-sensitive for all
searched fields.
Active + historical clients + all categories: This looks at all active and historical
l
clients and all categories. This search is not case-sensitive.
Active + historical clients + all categories (exact match): This looks at all active and
l
historical clients and all categories. This search returns only matches that are
exactly as typed (IP, username, device name, etc). This search is case-sensitive for
all searched fields.
Defines the number of rows to appear in any list by default. If a row count is manually
set, it will override the default setting.
Reset all list preferences including number of records per list, column order and
hidden column information.
Allows admin users to determine the columns that should be displayed and the order
they should be displayed for specific user roles. To customize lists for other users,
navigate to that list and select Choose Columns for roles above the list. Make the
desired column changes; select the roles to update and Save.
The frequency in which lists and charts automatically refresh on a page.
Number of minutes of idle time until AirWave automatically ends the user session. This
setting only the logged-in user of this AirWave. The default is 60 minutes. To set the
max idle timeout for all users of this AirWave, see
Options" on page 34.
for details.
"Setting Up Login Configuration
Dell PowerConnect W-AirWave 7.6 | User Guide